Genie® S®-65 XC™ and S-65 TraX™ telescopic boom lifts are the redesigned Xtra Capacity™ version of the popular Genie S-65 and S-65 TraX. They can perform a wider range of heavier lift tasks on construction and industrial jobsites thanks to their dual lift capacity.

Overview
• Full-time active oscillating axle and full-time positive traction for superior terrainability
• Chassis tilt sensor technology maximizes access to hard-to-reach work areas
• 1.52 m/5 ft robust articulating jib
• Dual lifting capacity of 300 kg/660 lb and 454 kg/1,000 lb to lift increased loads and up to 3 operators
• Automatic envelope control technology for a smooth operating envelope
• Zero-load field calibration and onboard diagnostics maximize serviceability

The Genie® S®-60 FE hybrid boom lift delivers rough terrain capabilities with clean and quiet jobsite performance to open the door to new opportunities in urban centers, arenas and residentials. The S-60 FE can perform in any surface including soft and loose rough terrain thanks to its lightweight. Additionally, it can work more than one week on a single tank of fuel and a full day’s shift on a single battery charge.

Overview
• 1/3 lighter than comparable booms, ideal for city jobs or applications requiring low floor loading
• True rough terrain performance with 4WD, 45% gradeability and active oscillating axle
• Simplified maintenance with DPF-free engine (Stage V/IIIA), fully sealed AC electric drive motors and 70% less hydraulic components in the drive chassis
• For reduced downtime, working is possible even on dead batteries thanks to state-of-the-art hybrid technology, also offering regenerative braking and automatic start-and-stop
• Two modes of operation: all-electric and hybrid, with outstanding efficiency and jobsite versatility
• 300 kg/660 lb capacity
• 1.83 m (6 ft) jib with a 130° working range for accurate positioning

Genie S-60 J telescopic boom offers the essential performance that operators need to get work done at height. It offers the right solution to get work done at height, including leading unrestricted platform capacity of 660 lb (300 kg), allowing for two occupants plus tools.

Overview
• Suited for use in general construction, maintenance, inspection and painting tasks
• Leading unrestricted platform capacity of 660 lb (300 kg) with 6-ft (1.8 m) jib
• Low 16,650 lb (7550 kg) operating weight in a compact chassis design
• Platform height of 60 ft 10 in (18.5 m) and horizontal reach of 40 ft 6 in (12.3 m)
• 1 ft 10 in (56.4 cm) of ground clearance to clear obstacles

Genie^® telescopic S^®-85 XC™ boom lift updates the brand’s popular earlier telescopic unit. This Genie Xtra Capacity™ model offers a dual lift capacity to perform a wider range of heavier lift tasks on construction and industrial jobsites, with innovative features to help increase productivity and efficiency.

Overview
• Full-time active oscillating axle and full-time positive traction for superior terrain ability
• Chassis tilt sensor technology  maximizes access to hard-to-reach work areas
• 1.52 m (5 ft) robust articulating jib
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators
• Automatic envelope control technology for a smooth operating envelope
• Zero-load field calibration and onboard diagnostics maximize serviceability

Perfect for heavy lifting in construction, bridge inspections and maintenance, stadium and sports arena, oil and gas, industrial, telecommunications and utility applications, the Genie^® SX™-125 XC™ telescopic boom lift works in more applications that require higher capacities thanks to its industry-leading dual lift capacity.

Overview
• Mini Genie X-Chassis® design for easy transport
• 1.52 m (5 ft) robust articulating jib
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators
• Impressive below-grade capabilities (2.69 m / 8 ft 1 in)
• Automatic envelope control and chassis tilt sensor technology for smooth operation
• Zero-load field calibration and onboard diagnostics maximize serviceability

The Genie^® SX™-135 XC™ telescopic boom lift provides 3 m (10 ft) more outreach and 32 per cent more capacity across its full working envelope than typical self-propelled booms of this size. Thanks to its unique up-and-over style capability, operators will easily navigate any obstacles at height.

Overview
• Mini Genie X-Chassis® design for easy transport
• 5.48 m to 9.14 m (18 to 30 ft) telescoping Jib-Extend® with 125˚ articulation, for an increased range of motion
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators
• Impressive outreach (27.43 m – 90 ft) and below-grade (6 m – 19 ft 8 in) capabilities
• Automatic envelope control and chassis tilt sensor technology for smooth operation
• Zero-load field calibration and onboard diagnostics maximize serviceability

The Genie® SX™-150 telescopic boom lift offers uncompromising productivity and industry-leading capacity through the full working envelope. This Genie boom is designed to perform in even the most extreme construction, maintenance, telecommunications, gas and oil, chemical maintenance, and large utility applications.

Overview
• Genie X-Chassis® system extends and retracts to provide stability on the job and a narrow profile for transport
• 3.05 m (10 ft) rotating jib with 135˚ vertical and 60˚ horizontal articulation to easily position workers and gear
• Standard 2.44 m (8 ft) self-levelling platform with an unrestricted capacity of 340 kg (750 lb)
• Drive-enable at full height for more productivity on the jobsite
• Features a working envelope ideal for the most extreme access jobs with a working height of 48.33 m (158 ft) and a horizontal reach of 24.38 m (80 ft)

The highest reaching model in the line-up, the Genie^® SX™-180 telescopic boom lift offers operators access to jobsites inaccessible by other booms, boom trucks and cranes. It is purpose-built to work on jobsites in the oil and gas industries and in industrial or commercial construction and in general maintenance applications.

Overview
• Genie X-Chassis® system extends and retracts to provide stability on the job and a narrow profile for transport
• 3.05 m (10 ft) rotating jib with 135˚ vertical and 60˚ horizontal articulation to easily position workers and gear
• Standard 2.44 m (8 ft) self-levelling platform with an unrestricted capacity of 340 kg (750 lb)
• Drive-enable at full height for more productivity on the jobsite
• Tackles the most extreme jobs with a working height of 56.9 m (186 ft) and horizontal reach of 24.4 m (80 ft)